DAVIES DJS Series Pressure System c/w Hydrogenie 2 Controller

DAVIES DJS Series Pressure System c/w Hydrogenie 2 Controller
The Davies Pumps DJS Jet assisted pumps with Hydrogenie 2 controller for operation and protection of the pump are particularly suited to domestic pressure systems with deep suctions up to 6m such as below ground tanks. Self-priming and very tolerant to suction lines in poor condition or undersized. Rugged stainless pump case and impeller for corrosion resistance.
Size:
Purchase Qty:
 

SUPPLIED WITH:

  • Hydrogenie 2 pre-wired auto controller
  • Connection union

CONTROLLER FEATURES:

  • Max pressure: 12Bar
  • Operating temperature range: -0 to +60ºC
  • Connection Thread: 1” male
  • Minimum pump pressure: 3.0Bar
  • Automatic reset/restart following run dry: If the pump runs dry the controller will attempt to re-prime
  • 10 times over 24hours, each attempt lasting 5 seconds.
  • 24H Anti-Jam function: If the pump remains idle for 24 consecutive hours the controller will run
  • the pump for 5 seconds to prevent the pump from jamming.

The DJS Jet assisted pumps are particularly suited to deep or long suction situations – below ground tanks, creeks, rivers and dams. Self-Priming and very tolerant to suction lines in poor condition or undersized.

TECHNICAL FEATURES:

  • Max working pressure: 6bar
  • Max liquid temperature: +45oc

MOTOR FEATURES:

  • TEFC continuous duty motor
  • Class F Insulation
  • Ambient temperature range: -15 to +40oc
  • Internal overload protector
  • IP55 protection

CONSTRUCTION MATERIALS

  • Pump casing, Seal plate , pump shaft & Impeller: 304 Stainless steel
  • Mechanical seal:
    DJS80 – Carbon/Ceramic
    DJS80 – Carbon/Ceramic
  • Diffuser/Venturi: Glass reinforced Plastic
  • O Rings: EPDM
  • Motor mount and casing: Aluminium

2 YEAR WARRANTY